Export Settings

Each file format available on the Export dialog offers a variety of settings that affect the resulting file(s).

The available settings are determined by the file format that is selected at the top of the dialog.

General settings

The following settings are available for all file formats.

Preset—sets predefined export options for a range of common file formats, color modes, and bit depths. Select from the pop-up menu.

Filename—tap and edit to define a new name for the exported file.

Area—instead of exporting the whole page, you can export the currently selected layer content, with or without other (deselected) layers, using the 'Selection Area' or 'Selection Only' option respectively.

To export drawn slices or specific layers, use Export Persona.

Multi-format settings

Availability of the following settings depends on the selected file format. Each setting is available for multiple file formats, as indicated.

Show descriptions:
All / None

PNG JPEG GIF TIFF EXR HDR TGAPSD PDF EPS SVG WEBP JPEG‑XL DWG DXF
Dimensions

By default, displays the native dimensions of your image. Type value(s) to set an alternative width and/or height for your exported image.

 

Lock aspect ratio—when selected (default), the image's native aspect ratio is honored. If this option is off, the exported image's width and height can be set independently.

checkcheckcheckcheckcheckcheckcheckcheckcheck
DPI

This option lets you choose the resolution for effects which will be rasterized on export.

checkcheckcheck
Rasterize

Select an option for rasterizing design elements which are unsupported by the file format. Select from the pop-up menu:

  • Nothing—no elements within the design are rasterized on export, therefore unsupported elements are not included in the exported file.
  • Everything—all elements within the design are rasterized for a resulting exported file which perfectly matches your original design.
  • Unsupported properties—only unsupported elements are rasterized in the exported file.
checkcheckcheck
Resample

Select which resampling method to use if the image is to be upsampled or downsampled on export.

The following resample settings are available:

  • Nearest Neighbor—simple resampling which has the fastest processing time. Use for hard-edge images.
  • Bilinear—algorithmic resampling for use when shrinking images.
  • Bicubic—algorithmic resampling for use when enlarging images. Resampling is smoother than Bilinear but has a slower processing time.
  • Lanczos 3—complex algorithmic resampling which gives the best results but with the longest processing time. Available as 'separable' and 'non-separable'; the latter gives marginally better results, but is slightly slower than 'separable'.
checkcheckcheckcheckcheckcheckcheckcheckcheckcheckcheckcheckcheck
Downsample images above

Choose whether to downsample raster images within the design.

When selected, if the adjacent DPI setting is exceeded by raster design elements, those elements will be rasterized down to this set DPI.

checkcheckcheck
Pixel Format

Sets the color mode for the exported image. Select from the pop-up menu.

checkcheckcheckcheckcheck
Use document resolution

Ensures the export is the same DPI as the current project's setting.

When unselected, use the adjacent DPI setting to override the current document's resolution setting for the export.

checkcheckcheck
Allow JPEG compression

When selected, rasterized design elements will be compressed to decrease exported file size. If this option is off, rasterized design elements will be exported as uncompressed.

checkcheckcheck
Quality

Sets the resulting quality of rasterized design elements in the exported image—or the overall image in the JPEG format's case. Higher quality may result in significantly larger file sizes.

For the JPEG format, this is an independent setting. For the other formats, it is dependent on the Allow JPEG compression option being active.

checkcheckcheckcheckcheckcheck
Matte

When the adjacent switch is on, sets the background color against which transparent areas of your design are composited in the exported file(s). Select a color from the pop-up panel. When the switch is turned off, the color has no effect and transparency is preserved in the exported file(s).

checkcheckcheckcheckcheckcheckcheck
Profile / ICC Profile

By default, this is set to the ICC profile of the project (document). However, the project's ICC profile can be overwritten for the export area. Select from the pop-up menu.

checkcheckcheckcheckcheckcheck
Embed ICC Profile

When selected, the ICC profile is included within the exported image's data, allowing the image to be viewed using the correct profile on any device. If this option is off, the viewing device must possess the ICC profile otherwise a substitute profile is used.

checkcheckcheck
Include bleed

When selected, the bleed area of your document, if set, will be included in the output. See related note in description of Printers marks.

checkcheckcheckcheckcheckcheckcheckcheck
Palette

By default, this is set to be automatically determined. However, you can specify an encoding palette yourself. Select from the pop-up menu.

checkcheck
Colors

Selects the number of colors available in the palette. Select from the pop-up menu.

checkcheck
Relative coordinates

When selected, objects in the exported file have relative positions for maximum editability. If this option is off, object positions are fixed to create a file which is optimized for viewing.

checkcheck
Embed metadata

When selected, any raster image's original metadata is preserved in the exported file. If this option is off, all original metadata is removed; use this for privacy reasons or to reduce file size (for web use).

checkcheckcheckcheckcheck
Compression

By default, this is set to ZIP. For TIFF, options to apply LZW compression or no compression are available. For EXR, options include RLE, PIZ and PXR24.

checkcheck

Settings unique toformat

The following settings are available only for the file format you have selected above.

Settings unique to PNG format

Show descriptions: All / None

Palettised

When selected, encodes the exported image by mapping it to the Palette and Colors settings.

Primaries (32-bit HDR PNG only)

Provides a full set of WCG BT primaries.

Transfer function (32-bit HDR PNG only)

HDR formats such as PQ, HLG and BT.709 are supported.

32-bit HDR PNGs (PNG specification - Third edition) are used for interchanging HDR broadcast imagery in a lossless format. A growing range of video editing apps now support this PNG file format, as well as the Google Chrome web browser.

The cICP chunk in this format allows the image to be tagged and processed with various video-centric color spaces (Primaries), which is more robust for broadcast workflows where the imagery needs to integrate seamlessly with video content.

Full Range (32-bit HDR PNG only)

When enabled, the entire dynamic range is used for the PNG, rather than being compressed.

Settings unique to JPEG format

Show descriptions: All / None

Progressive

When selected, the exported image is progressively compressed for optimized viewing when downloading.

Settings unique to TIFF format

Show descriptions: All / None

Save Affinity layers

Layers in the document are preserved in the exported TIFF image. These layers will only be readable when the file is opened in an Affinity app.

Settings unique to PDF format

Show descriptions: All / None

Embed profile

When selected (default), the chosen (or document's) color profile will be embedded in the exported file. If this option is off, the exported file will not have the color profile embedded with it (the viewing device will need to have the appropriate color profile installed to view the exported PDF accurately).

Embed Fonts

Select an option for handling fonts used in the document.

  • Text as curves—all text is converted to curves. This ensures the resulting exported file will display correctly regardless of the fonts installed on the viewing device.
  • All fonts—any fonts used in the document are embedded in the exported file. This ensures the resulting exported file will display correctly regardless of the fonts installed on the viewing device.
  • Uncommon fonts—fonts used are only embedded in the exported file if they are not part of the fonts traditionally installed on most devices. The viewing device must have the expected fonts installed to view any common fonts in the exported file.
  • No fonts—no fonts are embedded in the exported file. A viewing device must have all the used fonts installed to accurately view the exported file.
Subset fonts

When selected, embedded fonts will only include the glyphs used in the document. If this option is off, all glyphs for the used fonts are embedded in the exported file, regardless of whether they appear in the document or not.

Include layers

When selected, the PDF output will include all created layers (except invisible/hidden layers unless the corresponding setting is also selected).

Include invisible layers

When selected, layers at the top hierarchical level that are hidden and contain child layers that are not hidden will be included in the PDF output as invisible layers.

Include hyperlinks

When selected, the PDF output will include all created hyperlinks. (Primarily used when working on Affinity Publisher 2 documents in Affinity Designer 2 or Affinity Photo 2.)

Color Space

Choose whether to use the document's current color space or export using a selected color space. Select from the pop-up menu.

Compatibility

Sets the version and type of PDF to be exported. Select one of the following from the pop-up menu:

  • PDF 2.0 (ISO 32000-2)
  • PDF 1.7 (Acrobat 8)
  • PDF 1.6 (Acrobat 7)
  • PDF 1.5 (Acrobat 6)
  • PDF 1.4 (Acrobat 5)
  • PDF/X-1a:2003
  • PDF/X-3:2003
  • PDF/X-4
Allow advanced features

When selected, all design features supported by the PDF file format are exported as vectors. If this option is off, depending on the nature of these features, they are rasterized or converted to curves on export. These features include:

  • Artistic text which has been horizontally or vertically stretched.
  • Text which has an applied stroke.
  • Linear and radial gradients.
  • Non-solid transparencies.
Include bookmarks

When selected, PDF bookmarks are included in the PDF output. (Primarily used when working on Affinity Publisher 2 documents in Affinity Designer 2 or Affinity Photo 2.)

Convert image color spaces

When selected, all placed images will convert to the color space chosen on export (as set in the ICC Profile option). If this option is off, the color space of the imported placed image is honored.

Honor spot colors

When selected, spot colors within the design are exported as spot colors. If this option is off, spot colors are converted to an equivalent color within the exported file's color space (see above).

Overprint black

When selected, design elements which use CMYK black are set to overprint. If this option is off, CMYK black elements are set to be indistinguishable to other colors during printing.

Printers marks

When selected, the PDF output will show printer marks around the page edge. All printer marks are added by default. However, particular types of printer marks can be switched off, depending on your preference. These include:

  • Crop marks
  • Registration marks
  • Color bars
  • Page information
Require password to open

When selected, the Open password will be required to open the PDF. When unselected, anyone can open the PDF.

Open password

With Require password to open selected, type the password that will be required to decrypt and view the PDF.

Require password for modification and printing

When selected, the Permissions Password will be required to perform actions that you have chosen not to openly allow for the PDF, and to place the PDF in Affinity documents. When unselected, anyone can print, modify, copy from and place the PDF.

Permissions password

With Require password for modification and printing selected, type the permissions password for the PDF.

Allow document printing

When selected, anyone who can open the PDF can print it. When unselected, the PDF can be printed only by providing the permissions password.

Allow content modification

When selected, anyone who can open the PDF can modify its content. When unselected, the PDF's content can be modified only by providing the permissions password.

Enable copying of content

When selected, anyone who can open the PDF can selectively copy content from it. When unselected, content can be copied only by providing the permissions password.

Encryption

Indicates the type of encryption that will be applied to the PDF, if you have chosen to require an Open password or a Permissions password. The encryption type is determined by the Compatibility setting.

Settings unique to PSD format

Show descriptions: All / None

Rasterize all layers

When selected, layer content is rasterized in the exported file (the layer structure is retained). If this option is off, no rasterization takes place on export.

Compatibility mode

When selected, the exported file will be compatible with other apps which do not support some features (file size may also increase). If this option is off, the exported file may not be readable by other apps (depending on the features used in the image).

Smallest file sizes

When selected, the exported file will be compressed where possible but may not be readable by other apps. If this option is off, no compression will take place for the exported file.

Gradients

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Adjustments

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Lines

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Advanced Blending

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Layer Effects

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.

Settings unique to SVG format

Show descriptions: All / None

Text as curves

When selected, the text in the resulting file will be drawn as curves (therefore displaying precisely as intended, even if viewed on a device without the used fonts installed). However, this option will increase file size, and text won't be editable as text or available to "text to speech" in other apps. If this option is off, text will be exported as text and the viewing device will need the used fonts installed for it to be displayed correctly.

Long text spans

When selected, text is placed relative to previous lines of text (therefore producing smaller file sizes and simpler file structures). If this option is off, text is placed with absolute coordinates

Hex colors

When selected, colors in the exported file are expressed as RGB Hex values (therefore reducing file size but less human-readable). If this option is off, colors are exported as standard RGB values.

Flatten transforms

When selected, transformed objects are 'fixed' in the exported file. This allows for the file to be viewed more accurately across apps. If this option is off, objects remain dynamically transformed to allow for more flexible editing.

Use tile patterns

When selected, rasterized areas may be converted to a vector shape with a filled bitmap to give smoother, sharper edges. However, this might not be supported by some apps. If this option is off, objects will exist as singular elements within the exported file.

Set view box

When selected, the exported file includes coordinates and dimensions which define the view box of the image. If this option is off, no view box data is included in the exported file. The export area is used to define the view box.

Add line breaks

When selected, the code in the exported file will be optimized for human viewing and reading. If this option is off, the image will be exported with code on a single line which will make the file size significantly smaller.

Settings unique to EPS format

Show descriptions: All / None

PostScript level

Sets the version of the exported PostScript file. Select from the pop-up menu.

Minimize size

When selected (default), the exported file will be compressed to create the smallest file size possible.

Settings unique to EXR format

Show descriptions: All / None

Image Pixels

Choose whether to encode Image channels (RGBA etc) as 16-bit (half float) or 32-bit (full float).

Spacial Pixels

Choose whether to encode Spatial channels (XYZ etc) as 16-bit (half float) or 32-bit (full float).

Other Pixels

Choose whether to encode other/undetermined channels as 16-bit (half float) or 32-bit (full float).

Color profile from name

This is dependent on OpenColorIO. With a valid configuration, appending the filename during export will convert to that color space from scene linear. For example, name your file output acescg.exr to convert to ACEScg if your OCIO configuration lists that as a valid color space.

Multi channel

When exporting to OpenEXR format, converts layers with affixes—e.g. .RGB or .RGBA after the layer's name—back to multi channel data.

Include unknown channels

When turned on, channels whose type cannot be determined will still be exported as a single luminance-based channel.

Settings unique to WEBP format

Show descriptions: All / None

Lossless

When turned on, the newer, lossless WebP compression algorithm is used.

Settings unique to DWG/DXF formats

Show descriptions: All / None

DWG Version / DXF Version

Determines the file format version that will be exported. Available options are:

  • 2000-2002
  • 2004-2006
  • 2007-2009
  • 2010-2012
  • 2013-2016
  • 2018+
Layers

Determines how Affinity objects and layers are mapped to DWG/DXF layers, and so which DWG/DXF layer an exported item belongs in. (The DWG/DXF format does not allow for nested layers, so all exported layers are at the top level of the resulting file.)

Objects at the top of Affinity's layer stack, i.e. not belonging to an Affinity layer, are always mapped to Layer 0 of the exported DWG/DXF file.

Objects on top-level, unnamed Affinity layers are always mapped to Layer 0.

Objects on nested, unnamed Affinity layers and on named Affinity layers, however deeply nested, are mapped according to which of the following options is selected:

  • None—Objects are mapped to Layer 0. (Your Affinity document is flattened onto a single layer.)
  • Top Level Only—Objects are mapped to their top-level containing layer. Nested layers are then empty and not included in the exported file.
  • Any—Objects on named Affinity layers are mapped to their nearest named containing layer. Objects on unnamed layers are mapped to Layer 0.
  • Any named—Objects are mapped to their nearest named containing layer, or Layer 0 if there isn't one.
Gradient Strokes

Determines what to do with object strokes that have a gradient fill applied, which DWG/DXF does not support. Available options are:

  • Simplify—Applies a simplified gradient.
  • Replace with solid—Replaces the gradient with a solid fill of the color of the gradient's first stop.
  • Ignore—Removes the stroke from the output.
Gradient Fills

Determines what to do with object fills that have a gradient fill applied. Available options are:

  • Simplify—Applies a simplified gradient.
  • Replace with solid—Replaces the gradient with a solid fill of the color of the gradient's first stop.
  • Ignore—Removes the fill from the output.
Bitmap Strokes

Determines what to do with object strokes that have a bitmap fill applied, which DWG/DXF does not support. Available options are:

  • Replace with solid—Replaces the stroke with a solid fill of middle gray.
  • Ignore—Removes the stroke from the output.
Bitmap Fills

Determines what to do with object fills that have a bitmap fill applied, which DWG/DXF does not support. Available options are:

  • Replace with solid—Replaces the bitmap fill with a solid fill of middle gray.
  • Ignore—Removes the fill from the output.
Pressure strokes

Determines what to do with object strokes with a pressure profile applied, which DWG/DXF does not support. Available options are:

  • Expand—Expands the stroke with its pressure profile. The expanded stroke is then exported as a hatch.
  • Ignore and clamp—Drops the pressure profile from the stroke. The line weight is then clamped to the DWG/DXF maximum of 2.11 mm.
Overweight strokes

Determines what to do with object strokes with a line weight greater than 2.11 mm, which DWG/DXF does not support. Available options are:

  • Expand—Expands the stroke. The expanded stroke is then exported as a hatch.
  • Clamp—Clamps the line weight to a maximum of 2.11 mm.
Dashed strokes

Determines what to do with object strokes with a dash pattern. DWG/DXF does support dash patterns; however, DWG/DXF dashes do not scale automatically with line weight, as they do in Affinity. Available options are:

  • Keep—Approximates the dash pattern.
  • Expand—Expands the dashed stroke. The dashes are then exported as a hatch.
  • Make continuous—The dashes are ignored and the Continuous line type is applied to the exported curve.
Scale dash patterns

Determines what to do when a line weight adjustment is made to an exported curve, e.g. when one is clamped to the 2.11 mm maximum.

When enabled, the length of dashes scales automatically, like in Affinity. When disabled, dashes stay the same length, similar to AutoCAD's behavior.

Apply drawing scale

When enabled, the drawing scale is honored. For example, a rectangle that is one-inch wide with a drawing scale of 1:10 will be exported at 10 inches wide.

Note that Affinity documents support multiple drawing scales within the same document, which cannot be honored in a DWG/DXF file, so only the first/common drawing scale is applied.

SEE ALSO: