Pixel Brush Tool

Settings

The following settings can be adjusted using a vertical tool slider:

• Opacity/Accumulation toggle—how see-through the brush is or the extent of deviation in the opacity or visibility of the stroke as it is painted, respectively. Tap to toggle the setting, then slide up or down to set the value.
• Flow/Hardness toggle—how fast the brush effect is applied (1% is very slow, 100% is immediate) or how hard edged the brush is, respectively.
• Width—controls the width of the line using a vertical slider next to the tool's location. Slide up or down to set the width.

The following settings can be adjusted from the context toolbar:

• Alternate—toggles between primary and alternate painting modes. The alternate mode behaviour is defined by adjusting the Alternate setting.
• Alternate (setting)—allows you to set the alternate brush mode behaviour when Alternate is toggled on, i.e. to Erase, use the Background colour or Undo from snapshot.
• More—tap to display the Brushes dialog to access advanced brush settings.
• Colour—tap to choose the stroke colour. You can also set this via the Colour panel.
• Force Pressure—tap to control brush size with pressure if using a pressure-sensitive device. This overrides brush defaults.
• Stabiliser—enables stroke stabilisation using either a Rope stabiliser or Window stabiliser mode.
  • For rope mode—drag the stroke end by a 'rope' to smooth the stroke but introduce sharp corners at increasing rope Length (radius) values by redirecting the slackened rope. Set the value by toggling the Length vertical slider icon.
  • For window mode—smooths the stroke by averaging sampled input positions within a Window whose size is configurable. Set the value by toggling the Width vertical slider icon.