Export Settings

Each file format available in the Export Options panel and the Export dialog offers a variety of settings that affect the resulting file(s).

General settings

The following settings are available for all file formats, dependent on applicability to the export workflow that is in use.

Export Options panel Export dialog

Mode—with Selection enabled, the export options can be modified for the selected export area to be different from the default export option settings; Defaults, when enabled, sets the default export options for new slices.

check

Preset—sets predefined export options for a range of common file formats, color modes, and bit depths. Select from the pop-up menu.

check check

(File) Format—sets the graphics format for the exported file. Select from the pop-up menu.

check check

Resample—select which resampling method to use if the image is to be upsampled or downsampled on export. For the PDF, SVG and EPS file formats, this setting is available when you select More.

The following resample settings are available:

  • Nearest Neighbor—simple resampling which has the fastest processing time. Use for hard-edge images.
  • Bilinear—algorithmic resampling for use when shrinking images.
  • Bicubic—algorithmic resampling for use when enlarging images. Resampling is smoother than Bilinear but has a slower processing time.
  • Lanczos 3—complex algorithmic resampling which gives the best results but with the longest processing time. Available as 'separable' and 'non-separable'; the latter gives marginally better results, but is slightly slower than 'separable'.
check check

Area—instead of exporting the whole page, you can export the currently selected layer content, with or without other (deselected) layers, using the 'Selection Area' or 'Selection Only' options.

To export drawn slices or specific layers, use Export Persona.

check

Don't export layers hidden by Export Persona—when selected, layers which have been hidden while in Export Persona are excluded from the exported file even if they display on the page.

If this option is off, all objects on the page (which are within the Area selected above) will be exported regardless of whether they are hidden in Export Persona.

check

Multi-format settings

Availability of the following settings depends on the selected file format.

When using the Export dialog, many of these settings are only available when you select More.

Show descriptions:
All / None

PNG JPEG GIF TIFF PSD PDF SVG WMF EPS EXR HDR TGA
Size

By default, displays the native dimensions of your image. Type value(s) to set an alternative width and/or height for your exported image.

 

Lock aspect ratio Lock aspect ratio—when selected (default), the image's native aspect ratio is honored. If this option is off, the exported image's width and height can be set independently.

checkcheckcheckcheckcheckcheckcheck
Raster DPI

This option lets you choose the resolution for rasterization for effects which will be rasterized on export.

checkcheckcheck
Rasterize

Select an option for Rasterizing design elements which are unsupported by the file format. Select from the pop-up menu:

  • Nothing—no elements within the design are rasterized on export, therefore unsupported elements are not included in the exported file.
  • Everything—all elements within the design are rasterized for a resulting exported file which perfectly matches your original design.
  • Unsupported properties—only unsupported elements are rasterized in the exported file.
checkcheckcheck
Downsample images

Select whether to downsample raster images within the design.

checkcheckcheck
Above (DPI)

If this set DPI is exceeded by raster design elements, those elements will be rasterized down to this set DPI. This option is dependent on the Downsample images option being active.

checkcheckcheck
Pixel format

Sets the color mode for the exported image. Select from the pop-up menu.

checkcheckcheckcheckcheck
Use document resolution

Ensures the export is the same DPI as the current project's setting.

checkcheckcheck
Use DPI

Overrides the current project's resolution setting for the export. The exported image's DPI is set using the adjacent input box

checkcheckcheck
Allow JPEG compression

When selected, rasterized design elements will be compressed to decrease exported file size. If this option is off, rasterized design elements will be exported as uncompressed.

checkcheckcheck
Quality

Sets the resulting quality of rasterized design elements in the exported image—or the overall image in the JPEG format's case. Higher quality may result in significantly larger file sizes.

For the JPEG format, this is an independent setting. For the other formats, it is dependent on the Allow JPEG compression option being active.

checkcheckcheckcheck
Matte

Sets the background color for the exported image. Select from the pop-up panel.

checkcheckcheckcheckcheckcheckcheck
ICC profile

By default, this is set to the ICC profile of the project (document). However, the project's ICC profile can be overwritten for this export area. Select from the pop-up menu.

checkcheckcheckcheckcheck
Embed ICC profile

When selected, the ICC profile is included within the exported image's data, allowing the image to be viewed using the correct profile on any device. If this option is off, the viewing device must possess the ICC profile otherwise a substitute profile is used.

checkcheckcheck
Include bleed

When selected, the bleed area of your document, if set, will be included in the PDF output. See Setting bleed.

checkcheckcheckcheckcheckcheckcheckcheck
Palletized

When selected, encodes the exported image by mapping it to the Palette and Colors settings set below. (This option cannot be switched off for GIF images.)

checkcheck
Palette

By default, this is set to be automatically determined. However, you can specify an encoding palette yourself. Select from the pop-up menu.

checkcheck
Colors

Selects the number of colors available in the palette. Select from the pop-up menu.

checkcheck
(Use) Relative coordinates

When selected, objects in the exported file have relative positions for maximum editability. If this option is off, object positions are fixed to create a file which is optimized for viewing.

checkcheck
Embed metadata

When selected, any raster image's original metadata is preserved in the exported file. If this option is off, all original metadata is removed; use this for privacy reasons or to reduce file size (for web use).

checkcheckcheckcheckcheck
Export text as curves

When selected, the text in the resulting file will be drawn as curves (therefore displaying precisely as intended, even if viewed on a device without the used fonts installed). However, this option will increase file size, and text won't be editable as text or available to "text to speech" in other apps. If this option is off, text will be exported as text and the viewing device will need the used fonts installed for it to be displayed correctly.

checkcheck
PNG JPEG GIF TIFF PSD PDF SVG WMF EPS EXR HDR TGA

Settings unique toformat

Settings unique to JPEG format

Show descriptions: All / None

Progressive

When selected, the exported image is progressively compressed for optimized viewing when downloading.

Convert clips to paths

When checked, converts top level clipping curves to vector paths.

Settings unique to TIFF format

Show descriptions: All / None

Save Affinity layers

Layers in the document are preserved in the exported TIFF image. These layers will only be readable when the file is opened in an Affinity application.

Compression

By default, this is set to ZIP. Options to apply LZW compression or no compression are available.

Settings unique to PSD format

Show descriptions: All / None

Compatibility mode

When selected, the exported file will be compatible with other applications which do not support some features (file size may also increase). If this option is off, the exported file may not be readable by other applications (depending on the features used in the image).

Smallest file sizes

When selected, the exported file will be compressed where possible but may not be readable by other applications. If this option is off, no compression will take place for the exported file.

Rasterize all layers

When selected, layer content is rasterized in the exported file (the layer structure is retained). If this option is off, no rasterization takes place on export.

Gradients

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Layer effects

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Lines

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Adjustments

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.
Adv Blending

This setting offers two strategies for how to export this specific project attribute. Select from the pop-up menu.

  • Preserve accuracy—the listed attribute will be rasterized to preserve its intended design.
  • Preserve editability—the listed attribute will be exported with its original settings to allow for easy editing.

Settings unique to PDF format

Show descriptions: All / None

Preview export when complete

Opens the exported file in your device's default PDF viewer.

Compatibility

Sets the version and type of PDF to be exported. Select from the pop-up menu.

Color Space

Choose whether to use the document's current color space or export using a selected color space. Select from the pop-up menu.

Profile

Choose whether to use the document's current color profile or export using a specific color profile. Select from the pop-up menu.

Embed profiles

When selected (default), the chosen (or document's) color profile will be embedded in the exported file. If this option is off, the exported file will not have the color profile embedded with it (the viewing device will need to have the appropriate color profile installed to view the exported PDF accurately).

Convert image color spaces

When checked, all placed images will convert to the color space chosen on export (as set in the Profile option above). When unchecked, the color space of the imported placed image is honored.

Honor spot colors

When selected, spot colors within the design are exported as spot colors. If this option is off, spot colors are converted to an equivalent color within the exported file's color space (see above).

Overprint black

When selected, design elements which use CMYK black are set to overprint. If this option is off, CMYK black elements are set to be indistinguishable to other colors during printing.

Include hyperlinks

When selected, the PDF output will include all created hyperlinks.

Include bookmarks

When selected, PDF bookmarks are included in the PDF output. (Primarily used when working on Affinity Publisher documents in Affinity Designer or Affinity Photo.)

Include layers

When selected, the PDF output will include all created layers.

Include printers marks

When selected, the PDF output will show printer marks around the page edge. All printer marks are added by default. However, particular types of printer marks can be switched off, depending on your preference. These include:

  • Crop marks
  • Registration marks
  • Color and grayscale bars
  • Page information
Embed fonts

Select an option for handling fonts used in the document.

  • Text as Curves—all text is converted to curves. This ensures the resulting exported file will display correctly regardless of the fonts installed on the viewing device.
  • All Fonts—any fonts used in the document are embedded in the exported file. This ensures the resulting exported file will display correctly regardless of the fonts installed on the viewing device.
  • Uncommon Fonts—fonts used are only embedded in the exported file if they are not part of the fonts traditionally installed on most devices. The viewing device must have the expected fonts installed to view any common fonts in the exported file.
  • No Fonts—no fonts are embedded in the exported file. A viewing device must have all the used fonts installed to accurately view the exported file.
Subset fonts

When selected, embedded fonts will only include the glyphs used in the document. If this option is off, all glyphs for the used fonts are embedded in the exported file, regardless of whether they appear in the document or not.

Allow advanced features

When selected, all design features supported by the PDF file format are exported as vectors. If this option is off, depending on the nature of these features, they are rasterized or converted to curves on export. These features include:

  • Artistic text which has been horizontally or vertically stretched.
  • Text which has an applied stroke.
  • Linear and radial gradients.
  • Non-solid transparencies.

Settings unique to SVG format

Show descriptions: All / None

Export text as curves

When selected, the text in the resulting file will be drawn as curves (therefore displaying precisely as intended, even if viewed on a device without the used fonts installed). However, this option will increase file size, and text won't be editable as text or available to "text to speech" in other apps. If this option is off, text will be exported as text and the viewing device will need the used fonts installed for it to be viewed correctly.

Longer text spans

When selected, text is placed relative to previous lines of text (therefore producing smaller file sizes and simpler file structures). If this option is off, text is placed with absolute coordinates

Use hex colors

When selected, colors in the exported file are expressed as RGB Hex values (therefore reducing file size but less human-readable). If this option is off, colors are exported as standard RGB values.

Flatten transforms

When selected, transformed objects are 'fixed' in the exported file. This allows for the file to be viewed more accurately across applications. If this option is off, objects remain dynamically transformed to allow for more flexible editing.

Use tile patterns

When selected, rasterized areas may be converted to a vector shape with a filled bitmap to give smoother, sharper edges. However, this might not be supported by some apps. If this option is off, objects will exist as singular elements within the exported file.

Set viewBox

When selected, the exported file includes coordinates and dimensions which define the view box of the image. If this option is off, no view box data is included in the exported file. The export area is used to define the view box.

Add line breaks

When selected, the code in the exported file will be optimized for human viewing and reading. If this option is off, the image will be exported with code on a single line which will make the file size significantly smaller.

Settings unique to WMF format

Show descriptions: All / None

Enhanced Windows Metafile

When checked, the exported file with be in EMF format. When unchecked, the export file will be in WMF format.

Clip Transparency

When checked, any transparent area around your content is absent in the exported file. When unchecked, the transparent area is retained.

Settings unique to EPS format

Show descriptions: All / None

PostScript level

Sets the version of the exported PostScript file. Select from the pop-up menu.

Minimize size

When selected (default), the exported file will be compressed to create the smallest file size possible.

Settings unique to EXR format

Show descriptions: All / None

Color profile from name

This is dependent on OpenColorIO. With a valid configuration, appending the filename during export will convert to that color space from scene linear. For example, name your file output acescg.exr to convert to ACEScg if your OCIO configuration lists that as a valid color space.

Multi channel

When exporting to OpenEXR format, converts layers with affixes—e.g. .RGB or .RGBA after the layer's name—back to multi channel data.

Include unknown channels

When checked, channels whose type cannot be determined will still be exported as a single luminance-based channel.

Image pixels

Choose whether to encode Image channels (RGBA etc) as 16-bit (half float) or 32-bit (full float).

Spacial pixels

Choose whether to encode Spatial channels (XYZ etc) as 16-bit (half float) or 32-bit (full float).

Other pixels

Choose whether to encode other/undetermined channels as 16-bit (half float) or 32-bit (full float).

SEE ALSO: